Home > Hard Drives >

Dell 2TB 7.2K 3.5-inch SATA Hot Plug Hard Drive Kit - 59P14

Dell 2TB 7.2K 3.5-inch SATA Hard Drive W/ Tray - 59P14
Dell 2TB 3.5-inch SATA Hot Plug Hard Drive Kit - 59P14

Alternative Views:

SATA Storage Option for Dell®
PowerEdge™ and PowerVault™
Our Price: $108.45
Product Condition: New
Stock Availability: in stock
Databug Warranty: 1 Year

Availability:: Usually Ships in 24 Hours

Click to view another Select Server Model

Select Server Model:


Enterprise Class 7200 RPM 3.5 inch 2 TB SATA Disk Drive for Dell Servers and Storage Systems D PN- 59P14

This 2TB SATA disk drive is certified by Dell for select PowerEdge and PowerVault storage systems. Dell
enterprise class SATA hard drive offerings are put through an exacting and rigorous quality control process
along with the engineering processes, ensuring only the most qualified drives make it to the Enterprise
All Dell Enterprise hard drives have been developed and validated to function as designed on
the Dell platforms.

Dell drive part number 59P14 fits into a
3.5-inch form factor SAS or SATA hot-plug drive bay. If you
remove the caddie, you can use
the drive as a regular 7200RPM 2TB SATA 3G 3.5" hard drive.

At a Glance-
  • Genuine Dell Brand Hard Disk Drive - Validated on Dell Systems
  • Enterprise Class SATA with Support for NCQ
  • 7200-RPM Spindle Speed 3Gb/s Interface Speed
  • Plugs into a SAS Drive Bay (backplane) and Supported by SAS Controllers
  • Supports Multi Drive RAID Array
  • Designed for 24/7/365 Operation
  • 2 TB of Formatted Capacity

Note: Unless you specify the model number of your system, this hard drive will ship with tray as shown in the picture.


The D P/N 59P14 is compatible with a wide range of Dell systems including following PowerEdge models-

PowerEdge R210
PowerEdge R210 II
PowerEdge R300
PowerEdge T100
PowerEdge T105
PowerEdge T110
PowerEdge T300
PowerEdge T310
PowerEdge T320
PowerEdge T410
PowerEdge T420
Technical Specs

Features and Specs- Two Terabyte Dell Enterprise Class SATA Hard Disk Drive-

ProductEnterprise class hard disk drive
InterfaceSerial ATA
Interface Transfer Rate3 Gb/s
SAS CompliancyFits in SAS back-plane and
supported by SAS Controllers
Spindle Speed7200-RPM
Formatted Capacity2 TB
Average Seek Read/Write8.5 / 9.5 ms
Average Latency4.16 ms
HD Tray/CarrierIncluded
Native Command Queueing* (NCQ) Yes
Availability24/7/365 - Designed for servers
and storage systems
Form Factor3.5-inch
Compatible Bay1 x internal - 3.5" SAS/SATA
Multi Drive RAID SupportYes
CompatibilitySelect PowerEdge and
PowerVault systems

*Native Command Queuing:
Native Command Queuing (NCQ) is a technology designed to improve performance and reliability as the transactional work-
load increases on SATA hard disk drives. When multiple read and write commands are sent to the SATA drive, NCQ steps in
to optimize the completion of these commands by grouping the commands in order of processing efficiency, thereby reducing
the mechanical workload and increase performance from the drive. Without NCQ, the drive would process and complete each
command one at a time in the order in which it was received.

NCQ Benefits:

  1. Works in all systems where host controllers support the SATA NCQ feature
  2. Provides 100% backward compatibility with non-NCQ supporting systems
  3. Allows the reordering of commands by the storage device to increase the efficiency of its data transfers
  4. Improves seek time performance from hard drives and boost performance

Share your knowledge of this product. Be the first to write a review »