Home >

2.5-inch SAS/SATA Hard Drive Tray for PowerEdge Server - D273R
Dell 2.5-inch SAS/SATA Hard Drive Tray - D273R

Alternative Views:

Our Price: $18.00
Product Condition: New
Stock Availability: In stock
Databug Warranty: 1 Year

Availability:: Usually Ships in 24 Hours

Dell compatible hot swap hard drive carrier for select PowerEdge cloud servers. Compatible with SAS and SATA 2.5-inch
small form factor (SFF) hard drives. 4 screws included.
When removing or installing a hard drive, hold the drive by its sides. Be careful not to touch the printed circuit board on the
bottom of the drive. We recommend using Dell brand hard drive in Dell systems.
Technical Specs
  • Product: Disk Drive Carrier / Tray / Caddy
  • Disk Form Factor: 2.5-inch SAS or SATA drive
  • Compatibility: Compatible with a PowerEdge / CloudEdge C6100 / C6220 cloud servers
  • Brand: Dell compatible 3rd party equipment

Drive Carrier Replacement Instructions-
  1. Position and Mount the hard drive to the carrier using the included screws
  2. Open the latch and slide the drive into the drive bay
  3. Slide all the way in until you feel the drive snap into the back-plane
  4. Push the latch down to close.
Note: Always discharge static before you touch any parts or install any components inside the computer. Touch the metal body of the computer to discharge any static electricity from your body.

Share your knowledge of this product. Be the first to write a review »