Home > Networking >

Cisco 2-Port Serial WAN Interface Card - WIC-2T

Cisco 2-Port Serial WAN Interface Card - WIC-2T


 
Alternative Views:


Our Price: $32.00
Product Condition: Refurbished - Renew
Stock Availability: In stock
Databug Warranty: 1 Year


Availability:: Usually Ships in 24 Hours
Qty:

Overview
 
The dual-serial port WAN interface cards (WICs) for the Cisco 2600 and 1700 series feature Cisco`s new, compact,
high-density Smart Serial connector to support a wide variety of electrical interfaces when used with the appropriate
transition cable. Two cables are required to support the two ports on the WIC. Each port on a WIC is a different physical
interface and can support different protocols such as Point-to-Point protocol (PPP) or Frame Relay and Data Terminal
Equipment/Data Communications Equipment (DTE/DCE).
Technical Specs
  • Product: 2-port Serial WIC
  • Brand: Cisco
  • Port: 2 x Smart Serial Ports (12-in-1 connector)
  • Synchronous Maximum Speed: A) Supports one port at 8 Mbps when used in NM-1FE1R2W, NM-1FE2W, NM-2FE2W, or NM-2W, or Cisco 2600 chassis WIC slots. All other WIC ports on that network module or Cisco 2600 chassis must not be used. B) Supports two ports at 4 Mbps each when used in NM-1FE1R2W, NM-1FE2W, NM-2FE2W, or NM-2W, or Cisco 2600 chassis WIC slots. All other WIC ports on that network module or Cisco 2600 chassis must not be used. C) Supports 8 Mbps on all ports simultaneously on 2691, 3725, and 3745. No restrictions. Maximum six ports at 8 Mbps each.
  • Asynchronous Maximum Speed (per port): 115.2 kbps
  • Carrier Module Support: NM-2W, NM-1FE2W, NM-1FE1R2W, NM-2FE2W,
  • Compatible Routers: Cisco 1700, 2600, 2600XM, 3620, 3640, 3660, 3631 and, 3745

Share your knowledge of this product. Be the first to write a review »