Home > Hard Drives >

Dell 1TB 7.2K 3.5-inch SATA Hard Drive - C952J

Dell 1TB 7.2K 3.5-inch SATA Hard Drive - C952J
Dell 1TB 7.2K Hot-plug SATA Hard Drive - C952J
 

PowerEdge™ Storage Option
Our Price: $73.00
Product Condition: New
Stock Availability: In stock
Databug Warranty: 1 year


Availability:: Usually Ships in 24 Hours
Qty:

Overview Additional Information
 

Dell Enterprise Class SATA 7200 RPM 3.5" 1 TB HDD W/ Tray for PowerEdge Server and PowerVault C952J


Expansion / replacement drive for select Dell PowerEdge servers. 7200-RPM spindle rotational speed,
SATA 3G interface, 3.5" form factor and 1TB formatted capacity enterprise grade disk drive.
All Dell
Enterprise hard drives have been developed and validated to function as designed on the Dell platforms
where they are offered. Dell hard drive offerings are put through an exacting and rigorous quality
control process.

This drive fits in 3.5-inch hotswap bay with SAS backplane and supported by SAS controller. This HDD
is compatible with a wide range of servers including-


PowerEdge 1900

PowerEdge T110 II

PowerEdge T310


Note: Unless you specify the model number of your system, this hard drive will ship with tray as shown
in the picture.

Technical Specs

Features and Specs- One Terabyte Dell Enterprise Class SATA Hard Disk Drive-


ProductEnterprise class hard disk drive
BrandDell
InterfaceSerial ATA
Interface Transfer Rate3 Gb/s
SAS CompliancyFits in SAS back-plane and
supported by SAS Controllers
Spindle Speed7200-RPM
Formatted Capacity1 TB
Average Seek Read/Write8.5 / 9.5 ms
Average Latency4.16 ms
HD Tray/CarrierIncluded
Hot-plugYes
Native Command Queueing* (NCQ) Yes
Availability24/7/365 - Designed for servers
and storage systems
Form Factor3.5-inch
Compatible Bay1 x internal - 3.5" SAS/SATA
Multi Drive RAID SupportYes
CompatibilitySelect PowerEdge and
PowerVault systems

*Native Command Queuing:
Native Command Queuing (NCQ) is a technology designed to improve performance and reliability as the transactional work-
load increases on SATA hard disk drives. When multiple read and write commands are sent to the SATA drive, NCQ steps in
to optimize the completion of these commands by grouping the commands in order of processing efficiency, thereby reducing
the mechanical workload and increase performance from the drive. Without NCQ, the drive would process and complete each
command one at a time in the order in which it was received.


NCQ Benefits:

  1. Works in all systems where host controllers support the SATA NCQ feature
  2. Provides 100% backward compatibility with non-NCQ supporting systems
  3. Allows the reordering of commands by the storage device to increase the efficiency of its data transfers
  4. Improves seek time performance from hard drives and boost performance


Share your knowledge of this product. Be the first to write a review »