Home > Hard Drives >

Dell 1TB 7.2K 3.5" Hot Swap SATA Hard Drive W/ Tray - 050XV4

Dell 1TB 7.2K 3.5-inch SATA Hard Drive - 050XV4
Dell 1TB 3.5-inch SATA Hard Drive - 050XV4


 

Dell® Replacement Hard Drive
for PowerEdge™ and PowerVault™
Our Price: $64.00
Product Condition: New
Stock Availability: In stock
Databug Warranty: 1 year


Availability:: Usually Ships in 24 Hours
Qty:

Overview
 

Dell Enterprise Class SATA 7.2K 3.5" 1 TB Disk Drive W/ Tray for Dell Systems - 050XV4


This 1TB SATA disk drive is certified by Dell for select PowerEdge and PowerVault storage systems.
Dell enterprise class SATA hard drive offerings are put through an exacting and rigorous quality cont-
rol process along with the engineering processes, ensuring only the most qualified drives make it to
the Enterprise customers. All Dell Enterprise hard drives have been developed and validated to func-
tion as designed on the Dell platforms.

Dell 50XV4 is compatible with a wide range of server and storage systems including PowerEdge
R300, R310, R320, R410, R415, R510, R515, R710, R720, T300, T310, T410, T610 and T710

Dell hard drive model 050XV4 fits into a 3.5-inch form factor SAS or SATA hot-plug drive bay. With the
carrier removed, this 050XV4 can be used as a regular 7200RPM 1TB SATA 3G 3.5" hard drive yet
more reliable.

At a Glance-
  • Genuine Dell Brand Hard Disk Drive - Validated on Dell Systems
  • Enterprise Class SATA with Support for NCQ
  • 7200-RPM Spindle Speed 3Gb/s Interface Speed
  • Plugs into a SAS Drive Bay (back-plane) and Supported by SAS Controllers
  • Supports Multi Drive RAID Array
  • Designed for 24/7/365 Operation
  • 1 TB of Formatted Capacity

Note: Unless you specify the model of your system, this hard drive will ship with tray as shown
in the picture below-


Dell 1000GB 7.2K 3.5-inch SATA Hot Plug Hard Drive Kit replacement drive for Select PowerEdge
and PowerVault Dell P/N: 050XV4

Technical Specs
Features and Specs- Dell replacement or expansion hard drive for select
PowerEdge and PowerVault systems


ProductEnterprise class hard disk drive
BrandDell
InterfaceSerial ATA
Interface Transfer Rate3 Gb/s
SAS CompliancyFits in SAS back-plane and
supported by SAS Controllers
Spindle Speed7200-RPM
Formatted Capacity1 TB
Average Seek Read/Write8.5 / 9.5 ms
Average Latency4.16 ms
HD Tray/CarrierIncluded
Hot-plugYes
Native Command Queueing* (NCQ)Yes
Availability24/7/365 - Designed for servers
and storage systems
Form Factor3.5-inch
Compatible Bay1 x internal - 3.5" SAS/SATA
Multi Drive RAID SupportYes
CompatibilitySelect PowerEdge and
PowerVault systems

*Native Command Queuing:
Native Command Queuing (NCQ) is a technology designed to improve performance
and reliability as the transactional work-load increases on SATA hard disk drives.
When multiple read and write commands are sent to the SATA drive, NCQ steps in
to optimize the completion of these commands by grouping the commands in order
of processing efficiency, thereby reducing the mechanical workload and increase per-
formance from the drive. Without NCQ, the drive would process and complete each
command one at a time in the order in which it was received.

NCQ Benefits:
  1. Works in all systems where host controllers support the SATA NCQ feature
  2. Provides 100% backward compatibility with non-NCQ supporting systems
  3. Data delivery efficiency increases as the drive can re-order commands
  4. Improves seek time performance from hard drives and boost performance

-----------------------------------------------------------------------------

Share your knowledge of this product. Be the first to write a review »