Home > Hard Drives >

Dell 7200-RPM 3.5" 3TB SATA 6G Hard Drive W/ Tray - JDC7P

Dell 7200-RPM 3.5" 3TB SATA 6G Hard Drive W/ Tray - JDC7P
Dell 7.2K-RPM 3.5" 3TB SATA 6G HDD W/ Tray - JDC7P
Alternative Views:

for PowerEdgeâ„¢ and PowerVaultâ„¢
Our Price: $111.00
Product Condition: New
Stock Availability: Out of stock
Databug Warranty: 1 Year

Availability:: Usually Ships in 24 Hours


Dell 7200RPM, 3TB, 3.5" Form Factor Serial ATA HD with Caddy - Server Grade Hard Disk Drive JDC7P

Enterprise class 7200 RPM 3.5-inch 3 TB SATA HDD for Dell PowerEdge servers and PowerVault storage systems.
Dell enterprise class SATA hard drive offerings are put through an exacting and rigorous quality control process along
with the engineering processes, ensuring only the most qualified drives make it to the Enterprise customers.
All Dell
Enterprise hard drives have been developed and validated to function as designed on the Dell platforms.

Fits into a
3.5-inch form factor SAS or SATA hot-plug drive bay for hard drive. If you remove the caddie, you can use
the drive as a regular 7200RPM 3TB SATA 3G 3.5" hard drive.

At a Glance-
  • Genuine Dell Brand Hard Disk Drive - Validated on Dell Systems
  • Enterprise Class SATA with Support for NCQ - 24/7 Availability
  • 7200-RPM Spindle Speed and 3Gb/s Interface Speed Performance
  • Fully Compatible with SAS Drive Bay (backplane) and SAS Controllers
  • Supports Multi Drive RAID Environment
  • 3 TB of Formatted Capacity - Plenty of Storage

Note: Unless you specify the model number of your system, this hard drive JDC7P will ship with tray
as shown in the picture-


Dell 3TB 7.2K 3.5-inch SATA Hot Plug Hard Drive Kit for Select PowerEdge and PowerVault
Dell P/N:
Technical Specs
Dell Enterprise Class SATA Hard Disk Drive Specifications-

ProductEnterprise class hard disk drive
InterfaceSerial ATA - III (SATA-600)
Interface Transfer Rate6 Gb/sec
SAS Backplane ComplianceFits in SAS back-plane and
supported by SAS Controllers
Spindle Speed7200-RPM
Formatted Capacity3 TB
Average Seek Read/Write8.5 / 9.5 ms
Average Latency4.16 ms
HD Tray/CarrierIncluded
Native Command Queueing* (NCQ)Yes
Availability24/7/365 - Designed for servers
and storage systems
Form Factor3.5-inch
Compatible Bay1 x internal - 3.5" SAS/SATA
Multi Drive RAID SupportYes
CompatibilitySelect PowerEdge and
PowerVault systems

*Native Command Queuing:
Native Command Queuing (NCQ) is a technology designed to improve performance and reliability as the transactional work-
load increases on SATA hard disk drives. When multiple read and write commands are sent to the SATA drive, NCQ steps in
to optimize the completion of these commands by grouping the commands in order of processing efficiency, thereby reducing
the mechanical workload and increase performance from the drive. Without NCQ, the drive would process and complete each
command one at a time in the order in which it was received.

NCQ Benefits:

  1. Works in all systems where host controllers support the SATA NCQ feature
  2. Provides 100% backward compatibility with non-NCQ supporting systems
  3. Allows the reordering of commands by the storage device to increase the efficiency of its data transfers
  4. Improves seek time performance from hard drives and boost performance

Share your knowledge of this product. Be the first to write a review »