Home > Networking >

Cisco 1-Port T1 DSU/CSU WAN Interface Card - HWIC-1DSU-T1

Cisco 1-Port T1 DSU/CSU WAN Interface Card - HWIC-1DSU-T1
High-Speed WAN Interface Card - HWIC-1DSU-T1
 
Cisco High-Speed WIC
Our Price: $26.00
Product Condition: Refurbished
Stock Availability: in stockq
Databug Warranty: 1 Year


Availability:: Usually Ships in 24 Hours
Qty:

Overview
 

Serial high-speed WAN card (HWIC) for T1 provides highly flexible connections for Routers

HWIC-1DSU-T1 replaces WIC-1DSU-T1 V2 cards. These HWICs help customers enable applications
such as WAN access, legacy protocol transport, console server, and dial access server. You can mix
and match HWICs to tailor cost-effective solutions for common networking problems such as remote
network management, external dial-modem access, low-density WAN aggregation, legacy protocol
transport, and high-port-density support.


These highly flexible WICs facilitate WAN access and aggregation and legacy protocol transport-

WAN Access and Aggregation
Serial interfaces can be used to provide WAN access for remote sites. The HWIC-1DSU-T1 also offers
an integrated CSU/DSU, simplifying configuration and management. Integration allows management of
the router and CSU/DSU as a single SNMP entity while also providing detailed troubleshooting capabilities.
Troubleshooting features include self-test, loopbacks, CSU/DSU reset, alarm counters, and T1 statistics.





Legacy Protocol Transport
Serial and synchronous/asynchronous ports are ideally suited to transport legacy traffic across a TCP/IP
network, facilitating network convergence (Figure 3) and eliminating costly separate leased lines for this
traffic. Legacy protocols supported by Cisco IOS ® Software include:
  • Systems Network Architecture (SNA) and Synchronous Data Link Control (SDLC) Protocol
  • Binary Synchronous Communications Protocol (Bisync)
  • X.25 Protocol




Supported Platforms
Cisco 1841, 1941, 2801, 2811, 2821, 2851, 2901, 2911, 2921, 2951, 3825 and 3845 routers

Technical Specs
  • Product: HWIC for T1
  • Transmit Bit Rate: 1.544 Mbps +/- 50 bps
  • Receive Bit Rate: 1.544 Mbps +/- 100 bps
  • Synchronous Support: Yes
  • Asynchronous Support: No
  • Interface Connector: RJ-45
  • LEDs: CD (data carrier detect), LP (loopback), AL (alarm)
  • Network Clock Synchronization: Yes
  • Dimensions (H x W x D): 0.8 x 3.1 x 5.6 in.
  • Supported Routers: Cisco 1720, 1721, 1751, 1760, 2600XMs, 2691, 3631, 3725, 3745, and ICS 7750
  • Package Contents: Bare Card (no cables or accessoried included)
  • Manufacturer: Cisco



Share your knowledge of this product. Be the first to write a review »